Home > Processors / Eq's / Crossovers > Zapco
Sort By:
Page of 1
Audiocontrol ACR Remote level control in dash convenience Audiocontrol LC1i two channel line output converter Audio Control LC2I Line Converter with Bass Restoration
You use this handy wired remote control with select AudioControl sound processors to change the level or bass output. Its 2-color LED glows brighter as you increase output, then dims as you dial it back. Mount it on your dash so you can make on-the-fly level adjustments. The package includes a 20-foot cable and a mounting plate.
  • active 2-channel line driver/output converter
  • designed to work with aftermarket and factory systems
  • provides up to 9.5 Vrms output
  • preamp and speaker-level inputs
    • speaker-level inputs handle up to 40V (400 watts RMS)
Looking for great sound from your factory radio? Would you like to upgrade your car's premium system? AudioControl's LC2i line output converter takes amplified speaker-level signals and converts them into high-quality preamp signals that can be fed to another processor or amplifier. In other words, it lets you create an awesome car audio system without disturbing your factory controls or features.

Audiocontrol LC7i six channel line output converter HDSP-Z16 V AD-8G 8-Ch. DSP with HD Player ESS9038PRO DAC ZAPCO HDSP Z16 AD 16G 9038 DAC 16ch DSP w/ HD Player ESS9038PRO
  • 6-channel line output converter plus bass restoration
  • 6 speaker-level inputs (each can handle up to 400 watts RMS)
  • internal channel summing
  • AccuBASS™ bass restoration circuitry
  • 6 preamp outputs (up to 8.5 volts RMS)
  • level matching controls with Maximized Indicator LED
Other Features:
  • optional wired remote subwoofer level controller available (#161ACR1)
  • AutoMode™ turns 4-channel input to 6-channel output
  • GTO™ signal-sensing turn on
  • 12-volt turn-on lead output
  • recommended fuse rating: 2 amps
Bonus: free upgrade to metal mesh front panel

8-Ch. DSP with HD Player, ESS9038PRO DAC

Features and Functions

- 8 Channels DSP with HD Player
- 8 Analog Inputs (RCA + High Level), 5 Digital Inputs, 8 Analog Outputs
- Modular device: High-end solution with 18 independent PCB
- Player & DSP: All-in-one dual core processor
- DSP Processor: OMAP L-138 - 2 x 456 MHz, 32 Bit (till 64-bit/IEEE double precision)
- DSP Processor Point: Fixed & Floating
- DSP Sampling Rate: 192 KHz
- Player power: 456 Mhz - Arm 9 32 Bit. Read till 192 KHz/24 bit
- File Audio formats: WAV, AIF, AIFF, FLAC, ALAC, AAC, MP3, Direct.: File or Artist/Album or Title
- USB memory stick support: Formatted FAT32 with limited memory space (2 TB)
- ADC Processor (standard): AK5558, 32 Bit, 784 KHz, 115 dB DNR
- ADC Processor (option B): AK5578, 32 Bit, 784 KHz, 121 dB DNR
- DAC Processor (standard): ES9038PRO, 32 Bit, 784 KHz, 132 dB DNR
- Frequency response: 5Hz @ 45 KHz
- THD+N: 0,0008 (Digital Input), 0,001 (Analog Input) 1V Out
- S/N Device Floor Noise: -125 dB (from 20 Hz to 20 KHz), -135 dB (from 150 Hz to 20 KHz), -140 dB (average from 80 Hz to 20 KHz)
- S/N Ratio (Digital Inputs): from 115 to 120 dB A
- S/N Ratio (Analog Inputs): from 109 to 115 dB A
- Crosstalk: > 110 dB (from 300 Hz to 0.9 KHz)
- Crosstalk: average 115 dB (from 300 Hz to 0.9 KHz)
- Analog Inputs: 6/8 x RCA Low Level 1/5 Volt, 8 x High Level 4/20 Volt
- Digital Inputs: Optical: 24 Bit - 192 KHz, SPDIF: 24 Bit - 192 KHz, 3 x i2S: 24 Bit - 192 KHz
- Analog Outputs: 8 x RCA, 4 Volt (5 KOhm), Impedance: 100 Ohm
- Dash Board: 3" Touch Screen, 10 Preset
- Dash Board Control: Volume/Balance/Fader/Tone
- Wireless Control: Wi-Fi External Module (incl.)
- BT Streaming: External APTX HD Module (opt.)
- Tuning: Easy and Expert, "Double Front"
- I/O Setup: 2ch, 4ch, 6ch, 8ch, OEM SUM, AUX
- Digital Input Mode: HD, Optical, Coax, i2S 1, 2, 3
- EQ Parametric 30 / 6 poles
- XO Filters: Linkwitz, Butterw., Bessel, Tsecheb.
- Phase Filter: All channels 1Hz/1 Degree step
- VSEQ Filter: 50-200 Hz - 1 Hz step
- Power Supply: Operating: 6-16 Volt, Current Draw: 750 mA/14.4 V, Fuse: 1A
- Stop-Start ignition system support
- Main unit overall dimensions (mm): 217(L) x 164(W) x 57(H)
- Dash Board dim. (mm): 111(L) x 16(W) x 49(H)
(optional top panel shown in photo)

NOT THE LDAC MODEL

Subject to availability from Zapco....

16-Ch. DSP with HD Player, ESS9038PRO DAC

Features and Functions

- 8 Channels DSP with HD Player
- 8 Analog Inputs (RCA + High Level), 5 Digital Inputs, 8 Analog Outputs
- Modular device: High-end solution with 18 independent PCB
- Player & DSP: All-in-one dual core processor
- DSP Processor: OMAP L-138 - 2 x 456 MHz, 32 Bit (till 64-bit/IEEE double precision)
- DSP Processor Point: Fixed & Floating
- DSP Sampling Rate: 192 KHz
- Player power: 456 Mhz - Arm 9 32 Bit. Read till 192 KHz/24 bit
- File Audio formats: WAV, AIF, AIFF, FLAC, ALAC, AAC, MP3, Direct.: File or Artist/Album or Title
- USB memory stick support: Formatted FAT32 with limited memory space (2 TB)
- ADC Processor (standard): AK5558, 32 Bit, 784 KHz, 115 dB DNR
- ADC Processor (option B): AK5578, 32 Bit, 784 KHz, 121 dB DNR
- DAC Processor (standard): ES9038PRO, 32 Bit, 784 KHz, 132 dB DNR
- Frequency response: 5Hz @ 45 KHz
- THD+N: 0,0008 (Digital Input), 0,001 (Analog Input) 1V Out
- S/N Device Floor Noise: -125 dB (from 20 Hz to 20 KHz), -135 dB (from 150 Hz to 20 KHz), -140 dB (average from 80 Hz to 20 KHz)
- S/N Ratio (Digital Inputs): from 115 to 120 dB A
- S/N Ratio (Analog Inputs): from 109 to 115 dB A
- Crosstalk: > 110 dB (from 300 Hz to 0.9 KHz)
- Crosstalk: average 115 dB (from 300 Hz to 0.9 KHz)
- Analog Inputs: 6/8 x RCA Low Level 1/5 Volt, 8 x High Level 4/20 Volt
- Digital Inputs: Optical: 24 Bit - 192 KHz, SPDIF: 24 Bit - 192 KHz, 3 x i2S: 24 Bit - 192 KHz
- Analog Outputs: 8 x RCA, 4 Volt (5 KOhm), Impedance: 100 Ohm
- Dash Board: 3" Touch Screen, 10 Preset
- Dash Board Control: Volume/Balance/Fader/Tone
- Wireless Control: Wi-Fi External Module (incl.)
- BT Streaming: External APTX HD Module (opt.)
- Tuning: Easy and Expert, "Double Front"
- I/O Setup: 2ch, 4ch, 6ch, 8ch, OEM SUM, AUX
- Digital Input Mode: HD, Optical, Coax, i2S 1, 2, 3
- EQ Parametric 30 / 6 poles
- XO Filters: Linkwitz, Butterw., Bessel, Tsecheb.
- Phase Filter: All channels 1Hz/1 Degree step
- VSEQ Filter: 50-200 Hz - 1 Hz step
- Power Supply: Operating: 6-16 Volt, Current Draw: 750 mA/14.4 V, Fuse: 1A
- Stop-Start ignition system support
- Main unit overall dimensions (mm): 217(L) x 164(W) x 57(H)
- Dash Board dim. (mm): 111(L) x 16(W) x 49(H)
(optional top panel shown in photo)

NOT THE LDAC MODEL

Subject to availability from Zapco....